The StarFlower: Page 2 of 2

Beginner
Harry Martin cartoon
The StarFlower solar cooker
The StarFlower is being beta-tested. Production on this model has not yet started, but interested parties can contact Sam Erwin at P.O. Box 151, Tracyton, WA 98393; 360-373-1027.
Harry Martin cartoon
The StarFlower solar cooker

The StarFlower

That’s why I was delighted to hear from Sam this past summer. I thought he had retired—but no, he had been working on and improving his cooker. He offered to let me test the new StarFlower cooker. I jumped at the chance.

My brother-in-law happened to be visiting family a couple of hours from where Sam now lives. He was able to visit Sam, get instructions for assembling the unit, and pick up the StarFlower parts, which were in several boxes.

Now, I love assembly—you know, putting things together according to a plan. Just me, the instruction sheet, and a bunch of parts waiting to become a whole. It’s so Zen. Being familiar with the various incarnations of the Solar Chef gave me a foreknowledge of design. This cooker also has petal-shaped metallic reflectors mounted around a central cooking chamber. The control for elevation adjustment is the same. The cooking chamber is covered by a molded, clear plastic dome. There is also an option of buying a dome that contains a small solar-powered fan for convective cooking.

The cooking chamber sits on a turntable. The turntable is attached to a base that can be fit with casters or legs. Placed like large leaves on each side of the turntable are two small shelves that turn with the cooking chamber. These are handy places for resting oven mitts and seasonings, and setting down pot lids.

Sitting atop the reflectors are the ”power petals”—what give the cooking chamber temperature some extra oomph. Shaped like small lily pads, they mount to the spines that hold the larger metal reflectors in place.

Smoke from local wildfires hampered the testing, since I needed ample sunlight to test the StarFlower. But when I did, it performed like a champ. I placed it on the solar cooking platform I made from the bottom of a defunct redwood hot tub. I chose to use the table leg base configuration so the cooker would not roll off the platform.

I used my Polder digital cooking thermometer, which has a plug-in temperature probe on a wire that I was able to place in the cooker next to the cooking vessels. The StarFlower baked some carrot bread in about 35 minutes, at 325°F. For my next dish, a large casserole, the oven temperature rose to 350°F in about 30 minutes. There was a lot of liquid in the casserole and that has a tendency to slow the temperature’s climb. But once the dish reached 350°F, maintaining the temperature was easy by turning the cooker to keep the sun focused on the cooking chamber.

One bright sunny day, I put a whole winter squash in the oven with the temperature probe next to it. The first time I checked the temperature and refocused the cooker, the thermometer readout said 386°F. I was pretty excited. I refocused the cooker and watched the temperature climb. When it got to 400°F, my digital readout blipped—apparently, it had reached its readout limit. I quickly located one of my analog oven thermometers and put it next to the squash. It read 435°F! It didn’t take long for that squash to be done.

I have cooked pots of beans, rice, breads, casseroles, squash, and fruit cobblers in the StarFlower. It cooks in real “recipe” time—or less. Everything I’ve cooked has been delicious.

Design Savvy

The StarFlower makes solar cooking almost effortless. It is so easy to turn and elevate to focus the sun onto the cooking chamber. The chamber itself is stationary, and keeps the pots and food level as you refocus the unit. The small side table and leaves turn with the unit and are so practical for storing cooking implements. The design is well-thought-out on a practical level.

I didn’t think it was possible, but now another favorite solar cooker has stolen my heart, and enriched my solar cooking experience.

Comments (1)

James Riggins's picture

When trying to contact Sam for more information on the StarFlower, I discovered the phone number in the photo caption (in the print version of this article) has an incorrect area code. Sam's correct phone number is (360) 373-1027. At 90+ years old he is a wealth of knowledge and was a delightful gentleman to talk to.
Jim Riggins

Show or Hide All Comments

Advertisement

X