What is Solar Electricity?

Beginner
Anatomy of a Photovoltaic (PV) Cell
Anatomy of a photovoltaic (PV) cell.
Solar-Electric (PV) Cell Types
Solar-electric (PV) cell types.
Batteryless Grid-Tied Solar-Electric System Diagram
Diagram of a batteryless grid-tied solar-electric system.
Solar-Electric (PV) Module Specifications
Solar-Electric (PV) Module Specifications
Anatomy of a Photovoltaic (PV) Cell
Solar-Electric (PV) Cell Types
Batteryless Grid-Tied Solar-Electric System Diagram
Solar-Electric (PV) Module Specifications

What is Solar Electricity?

Photovoltaic (PV) modules make electricity from sunlight, and are marvelously simple, effective, and durable. They sit in the sun and, with no moving parts, can run your appliances, charge your batteries, or make energy for the utility grid.

A PV array is the energy collector—the solar “generator” and does so via the photovoltaic effect. Discovered in 1839 by French physicist Alexandre-Edmund Becquerel, the photovoltaic effect describes the way in which PV cells create electricity from the energy residing in photons of sunlight. When sunlight hits a PV cell, the cell absorbs some of the photons and the photons’ energy is transferred to an electron in the semiconductor material. With the energy from the photon, the electron can escape its usual position in the semiconductor atom to become part of the current in an electrical circuit.

Most PV cells fall into one of two basic categories: crystalline silicon or thin-film. Crystalline silicon modules can be fashioned from either monocrystalline, multicrystalline, or ribbon silicon. Thin-film is a term encompassing a range of different technologies, including amorphous silicon, and a host of variations using other semiconductors like cadmium telluride or CIGS (copper indium gallium diselenide). Thin-film technology generates a lot of the current R&D chatter, but crystalline modules currently capture more than 80% of the marketplace.

To use the energy from the array, you may also need other components, such as inverters, charge controllers and batteries, which make up a solar-electric system. The components required are dependent on the system type designed. System types include:

PV-DIRECT SYSTEMS: These are the simplest of solar-electric systems, with the fewest components (basically the PV array and the load). Because they don’t have batteries and are not hooked up to the utility, they only power the loads when the sun is shining. This means that they are only appropriate for a few select applications, notably water pumping and ventilation—when the sun shines, the fan or pump runs.

OFF-GRID SYSTEMS: Although they are most common in remote locations without utility service, off-grid solar-electric systems can work anywhere. These systems operate independently from the grid to provide all of a household’s electricity. These systems require a battery bank to store the solar electricity for use during nighttime or cloudy weather, a charge controller to protect the battery bank from overcharge, an inverter to convert the DC PV array power to AC for use with AC household appliances, and all the required disconnects, monitoring, and associated electrical safety gear.

GRID-TIED SYSTEMS WITH BATTERY BACKUP: This type is very similar to an off-grid system in design and components, but adds the utility grid, which reduces the need for the system to provide all the energy all the time.

BATTERYLESS GRID-TIED SYSTEMS: These most common PV systems are also known as on-grid, grid-tied, utility-interactive, grid-intertied, or grid-direct. They generate solar electricity and route it to the loads and to the electric utility grid, offsetting a home’s or business’s electricity usage. System components are simply comprised of the PV array, inverter(s), and required electrical safety gear (i.e., fuses/breakers/disconnects/monitoring). Living with a grid-connected solar-electric system is no different than living with utility electricity, except that some or all of the electricity you use comes from the sun. (The drawback of these batteryless systems is that they provide no outage protection—when the utility grid fails, these systems cannot operate.)

Comments (5)

Judy Merry's picture

Under Batteryless grid-tied systems above you say 'they generate solar electricity and route it to the loads and to the electric utility grid'. I live in California (SCE territory) and thought there is no way to route it 'to the loads'. I realy would LIKE to ... how can it be done? Judymerry@aol.com

Justine Sanchez's picture

Hi Judy,
Thanks for posting! In the case of a batteryless PV system, generally speaking the output of our grid-tied inverter will connect with our main service panel by "back feeding" a circuit breaker in that panel. After that point either the loads in the home will use all the power as it is generated by the PV system, if the household power requirements meet or exceed the PV system production. If the PV production exceeds what is required by the household loads then the excess power is then pushed onto the grid. And conversely if the Pv system isn't producing enough power to cover the requirements of the household loads, then the grid will supply the additional required power.
Now that is the common way to interconnect the PV system with the grid…however some incentive programs may require a buy-all-sell-all configuration (perhaps that is the case with SCE?) where the PV system simply "sells" all power to the grid (via a supply side connection and separate meter) and the house "buys" all power from the grid. And this is common for Feed-in-Tariff programs.

Either way your system is producing electricity from sunlight and that energy is offsetting energy that would normally come from other sources, how it is exactly connected and metered doesn't negate that fact.

Hopefully I have answered your question, but if I was off the mark feel free to post again!
Cheers,
Justine Sanchez
Home Power Magazine

joyfifth6's picture

I hope every home in the community can afford to install these solar panel so that we can have a greener environment and we cannot harm the ozone layer. And with regards to energy source this is very ideal because there are no coals to burn or any pollution can accumulate in the city. This is ideal for the city and the local to keep our technology rolling.
Thanks for this wonderful information and this will solve the problem with regards to pollution.

Aaron Longwell's picture

MLA Style for citing a web site would look like this:

"Solar Electricity Basics." Home Power Magazine
3 Dec, 2012. https://homepower.com/articles/what...

Here's some more on the MLA style:
http://www.easybib.com/reference/gu...

Yeneng Sun's picture

Great article! I'm wondering how to cite this page for my school project, any help here?

Show or Hide All Comments

Advertisement

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading